Menu
Part Number (Diameter x # of Teeth x Pilot Bearing Bore)
A) HT150 1 ½” X 10T X .965”
B) HT175 1 ¾” X 10T X 1.165”
C) HT175A 1 ¾” X 10T X .970”
D) HT175X1 1 ¾” X 10T X .990
E) HT200 2” X 10T X 1.165”
A) 125489, 6 Point depress and turn HD Kwik Adjuster (top and side views)
B) 125489, 6 Point depress & turn Eaton Kwik Adjuster (top and side views)
C) M871, J-Lock for manual adjust Stamped Steel clutch
D) 909EZ, Lock Strap Style sprocket gear Adjuster (top and side views)
E) M696, Fork lock for manual adjust cast iron Angle Spring Spicer clutches
CSB 1616
CSB1616/4X
CSB1769-3x
*photo is not exact cross shaft
*photo is not exact cross shaft
GCY-6113 (fork) = CF200
Part #: T103
Letter in Photo: A
Description: Spicer manual adjsuting tool for angle spring clutches
Part #: T0670
Letter in Photo: B
Description: Drive lug (pin) alignment & installation tool
Part #: 274C-28
Letter in Photo: A
Type & Other Parts Required: THREADED LUG (Requires 1 nut per lug)
Lugs Per Flywheel: 6
Part #: 274C-6
Letter in Photo: B
Type & Other Parts Required: DRIVE PIN (Requires 2 set screws per lug)
Lugs Per Flywheel: 6
Part #: 183GC145
Letter in Photo: C
Type & Other Parts Required: MACK THREADED LUG (Requires 1 nut per lug)
Lugs Per Flywheel: 8
Part #: 274C-28NUT
Letter in Photo: D
Type: Fits 274C-28 and 183GC145
Part #: SET SCREW
Letter in Photo: E
Type: 2 Required per 274C-6 Drive Pin
Part #: 127879X
Letter in Photo: A
Description: Throw Out Bearing 2” with Double Grease Fitting
Part #: M1034
Letter in Photo: B
Description: 15.5” PTO Tube 14” & 15.5” Available remanufactured (washer and snap ring included)
Part #: 127492X
Letter in Photo: C
Description: Anti-rattle springs set of 3 for 14” Mack PTO
Part #: M1033
Letter in Photo: D
Description: Ring Gear Same for both 14" & 15.5" Units